[May 04 2008] - Rumble

Fixed numerous warnings for gcc -g -O2 -W -Wshadow -Wcast-qual flags.
  Fixed zpurge mudlog to use zone vnum not rnum. (thanks Jamdog)
  Fix to parse_mobile conversion to 128 bits. (thanks Jamdog)
  Changed autorun.sh from 9091 to 4000. (thanks John Smith)
[Apr 27 2008] - Rumble
  Removed some defunct gemote code. (thanks Fizban)
[Apr 26 2008] - Rumble
  Added README.BSD. (thanks Blix)
  Cleaned up act.comm.c, mobs can now use comm channels. (thanks Rhade)

doc/README.BSD

@@ -0,0 +1,116 @@
+                     Compiling tbaMUD under BSD
+                  based on UNIX readme for circlemud
+                            by Jeremy Elson 
+                 For help, visit http://www.tbamud.com
+
+Compiling tbaMUD is easy using FreeBSD.  If you plan on compiling on a 
+FreeBSD machine, these instructions are for you.  If not, check the main 
+README file to get a list of other operating systems that can be used to
+compile and run tbaMUD.
+
+Current versions of tbaMUD use the GNU 'autoconf' package to
+automatically determine most of the important characteristics of your
+system, so chances are good that tbaMUD will compile correctly on any
+UNIX system -- even one that we have never seen before.  However, if you
+do have problems, please visit http://www.tbamud.com so that we
+can try to make tbaMUD work with your system.
+
+
+1)  Download the latest version of tbaMUD.  You can always find the
+    latest version at the following site:
+
+        http://www.tbamud.com
+
+		
+2)  Unpack the archive.  If you have the .tar.gz version, uncompress it
+    using gzip (GNU unzip) and the tar archiver.  (Both of these utilities
+    can be downloaded from ftp.gnu.ai.mit.edu:/pub/gnu if you don't have
+    them.)  To unpack the archive on a UNIX system, type:
+
+        gzip -dc tbaMUD-xxxx.tgz | tar xvf -
+
+
+3)  Configure tbaMUD for your system.  tbaMUD must be configured using
+    the 'configure' program which attempts to guess correct values for
+    various system-dependent variables used during compilation.  It uses
+    those values to create a 'Makefile' and a header file called 'conf.h'.
+
+    From tbaMUD's root directory, type
+
+        ./configure
+
+    If you're using 'csh' on an old version of System V, csh might try to
+    execute 'configure' itself, giving you a message like "Permission denied"
+    when you try to run "./configure".  If so, type "sh ./configure" instead.
+
+    'configure' can take several minutes if you're using a slow computer.
+
+    'configure' will attempt to use the 'gcc' compiler if it exists; if not,
+    it will try 'cc'.  If you want to use a different compiler, set the
+    'CC' environment variable to the name of the compiler you wish to use.
+
+    For example, if you want to use the 'xlc' compiler, and your shell is
+    csh or tcsh:
+
+	setenv CC xlc
+	./configure
+
+    Or, if you want to use the 'xlc' compiler, and your shell is sh or bash:
+
+	CC=xlc ./configure
+
+    This will tell 'configure' to use the 'xlc' compiler instead of 'gcc'.
+
+
+4)  Build the tbaMUD server.  This must be done from the 'src' directory.
+    Type:
+   
+        cd src; gmake all
+
+    This will build tbaMUD proper as well as its 10 or so ancillary
+    utilities, which can take anywhere from 5 minutes to an hour depending
+    on the speed of your computer.
+
+    Note that in the future, when you need to recompile tbaMUD as you make
+    changes to the code, it is NOT necessary to run 'configure' again (it
+    should only be run once, after the first time you unpack tbaMUD from
+    its .tar file).  If you move the source code to a different computer,
+    you should reconfigure it by deleting the file 'config.cache' and
+    running 'configure' again.
+
+    The first time you try to compile tbaMUD, you will be asked to read the
+    tbaMUD license.  Please read it!
+
+	
+5)  Go back to tbaMUD's root directory (by typing "cd ..") and run the
+    tbaMUD server.  The easiest way to do this the first time is
+    to use the 'autorun' script, which can be run in the background by
+    typing:
+
+        ./autorun &
+
+    Make sure to do this in tbaMUD's root directory, not the src directory
+    that you used for the previous step.  A file called 'syslog' will start
+    growing in the same directory that contains tbaMUD's log messages.
+
+    If you're using 'csh' on an old version of System V, csh might try to
+    execute 'autorun' itself, giving you a message like "Permission denied"
+    when you try to run "./autorun".  If so, type "sh ./autorun &" instead.
+
+	
+6)  Wait until the line 'No connections.  Going to sleep.' appears in the
+    syslog.  This indicates that the server is ready and waiting for
+    connections.  It shouldn't take more than about 30 seconds for the MUD
+    to reach this state, though performance will vary depending on how fast
+    your computer is.
+
+    If a file appears called 'syslog.CRASH', the MUD has terminated
+    (probably abnormally).  Check the contents of syslog.CRASH to see
+    what error was encountered.
+
+
+7)  Type 'telnet localhost 4000' to connect.  The first person to log in
+    will be made an implementor (level 34) with all powers.
+
+
+(write to help@tbamud.com for help)